Back to Getting Started

ProSolids Wire EDM Installation Guide

Complete step-by-step installation guide for ProSolids Wire EDM software. Follow these instructions carefully to ensure a successful installation.

Operating Requirements

Minimum Requirements

  • • Operating System: Windows 10 or 11
  • • Processor: Intel i3 or greater
  • • Memory: 8GB RAM
  • • Storage: 1.5GB combined
  • • Display: Standard HD (1080p)

Recommended Configuration

  • • Operating System: Windows 11
  • • Processor: Intel i7 or similar
  • • Memory: 16GB RAM
  • • Storage: 1.5GB combined
  • • Display: Standard HD (1080p)

Important Installation Notes

System Requirements

ProSolids Wire EDM requires the same system specifications as Autodesk Fusion 360, plus additional storage space for the software components.

Trial License

Your trial license is automatically activated when you first use ProSolids Wire EDM. No manual license key entry is required.

Simulation Features

To use simulation features, you'll need to install Predator Virtual CNC software separately. This is optional but recommended for full functionality.

Installation Steps

1

Close Fusion Completely

Before installing ProSolids Wire EDM, make sure to close Autodesk Fusion 360 completely.

Important: Ensure Fusion 360 is completely closed before proceeding with the installation.

2

Run the Installer

Run the "ProSolids Wire EDM xx.xx.xxxx.exe" installer. Follow the prompts and install CodeMeter and other prerequisites as needed.

Critical: Always run the installer as administrator to ensure proper installation of all components.

3

Install Predator (Optional)

If you plan to use Predator Virtual CNC simulation, run the installer for that as well.

Note: Predator Virtual CNC is required for simulation functionality.

4

Restart Fusion 360

After installation is complete, restart Fusion 360. The ProSolidsWireEDM add-in will be listed under the add-ins.

Success: Look for the ProSolidsWireEDM add-in in Fusion 360 after restarting.

Troubleshooting Common Issues

Don't See ProSolids?

If ProSolids Wire EDM doesn't appear in Fusion 360:

  • • Check the Scripts & Add-ins manager in Fusion 360
  • • Ensure the add-in is enabled
  • • Restart Fusion 360 completely

Installation Failed?

If the installation fails:

  • • Temporarily disable antivirus software
  • • Run installer as administrator
  • • Ensure Fusion 360 is completely closed
  • • Check available disk space

License Issues?

Your trial is automatically activated:

  • • Trial begins the first time you start ProSolids Wire EDM
  • • No manual license key entry required
  • • Contact support if activation fails

General Tips

  • • Always close Fusion 360 before installing
  • • Run installer as administrator
  • • Accept default installation settings
  • • Restart Fusion 360 after installation

Post-Installation Verification

Verify ProSolids Wire EDM is Available

Open Fusion 360 and check that 'Wire EDM' appears in the Manufacture toolbar.

Check Scripts & Add-ins Manager

Verify that ProSolids Wire EDM is listed and enabled in Fusion 360's Scripts & Add-ins manager.

Install Predator Virtual CNC (Optional)

For simulation features, install Predator Virtual CNC software from the provided link.

Trial Activation

Your trial will automatically activate the first time you use ProSolids Wire EDM features.

Tutorial Files

Tutorial files can be found in: C:\ProgramData\ProSolids\Examples

These example files will help you get started with ProSolids Wire EDM and learn the various features and workflows.